Filter
Top Products
Station Programming (Personal Programming) 2-23
2.2 Station Programming (Personal Programming)
Ringing Line Preference — Incoming (Assignment)
When you go off-hook, you can answer any call ringing at your telephone.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Prime Line Preference — Incoming (Assignment)
When you go off-hook, you can answer a call on the line which is assigned as the prime
line.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Dial 2.
2
Press STORE.
AUTO DIAL
STORE
Dial 2.
2
• The STORE indicator lights.
• The display shows the initial
programming mode.
• The display shows the current
status.
<PT Display Example>
Pref. In :Ring
PT
Dial 3.
3
Dial 2.
2
Press STORE.
AUTO DIAL
STORE
Enter the outside (CO) line number
(1 through 6).
outside (CO) line no.
• The STORE indicator lights.
• The display shows the initial
programming mode.
• The display shows the current status.
<PT Display Example>
outside (CO) line number
Pref. In :CO-x