Filter
Top Products
2-22 Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
Preferred Line Assignment — Incoming
Allows you to select the method used to answer incoming outside calls from the
following three line preferences.
1.) No Line Preference
2.) Ringing Line Preference (— default)
3.) Prime Line Preference
Follow the corresponding programming procedure according to your selection.
No Line Preference — Incoming (Assignment)
No line is selected when you go off-hook. You must select a line to answer an incoming
call by pressing a CO button.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
PT
Dial 1.
1
Press STORE.
AUTO DIAL
STORE
Dial 2.
2
• The STORE indicator lights.
• The display shows the initial
programming mode.
• The display shows the current
status.
<PT Display Example>
Pref. In :No