Filter
Top Products
Display Description
Back at 11:00AM
BGM off
BGM on
Busy
Busy Ovrde Allow
Busy Ovrde Deny
C.Pickup Allow
C.Pickup Deny
Call on CO 1
Call Prked at 1
Callback All COs
Callback CO 1
Callback CO G1
Callback Ext 101
CID Log Clear
CO 1
CO 1 0:01’15
CO 1 & CO 2
CO 3 Free
Conference
CO in Use
CO Not Assigned
CW(CO) Off
CW(CO) On
CW(Ext) Off
CW(Ext) On
Data Mode Off
Data Mode On
Day Mode
Absent Message 4.
Stopped BGM.
Started BGM.
The called doorphone or external pager is in use.
Canceled “Executive Busy Override Deny”.
Completed setting “Executive Busy Override Deny”.
Canceled “Call Pickup Deny”.
Completed setting “Call Pickup Deny”.
Called by an outside (CO) line.
Completed setting “Call Park”.
Completed setting “Camp-On” when there is no idle outside (CO) line.
Completed setting “Camp-On”.
Completed setting “Camp-On”.
Completed setting “Camp-On”.
Cleared all logs.
An idle outside (CO) line is seized.
The duration time of incoming outside call.
A Conference with two outside (CO) lines.
Called by hold recall. — “Conference, Unattended”.
Called by “Camp-On” (Outside (CO) line recall).
Confirming key programming on the Conference button.
The selected outside (CO) line is busy.
The desired outside (CO) line is restricted (not assigned).
Canceled “Call Waiting” for outside calls.
Completed setting “Call Waiting” for outside calls.
Canceled “Call Waiting” for intercom calls.
Completed setting “Call Waiting” for intercom calls.
Canceled “Data Line Security”.
Completed setting “Data Line Security”.
Day mode status.
— “Time (Day/Night/Lunch) Service”
Appendix 5-3
5 Appendix