Filter
Top Products
4-4 DSS Console Features
4.2 DSS Console Features
Station Programming
PF buttons are provided with no default settings, while each DSS button has a default
setting as follows.
DSS 01–24: extension numbers 101–124
DSS 25–32: no default settings
To meet your various needs, DSS buttons can be changed to other feature buttons.
Every DSS or PF button can be assigned to another extension number, telephone number
or feature number by Station Programming.
Conditions
• DSS buttons can be changed to any of the following feature buttons by Station
Programming.
a) Another DSS Button (Every DSS button can be assigned to another extension
number.)
b) One-Touch Dialing/One-Touch Access Button
c) Live Call Screening (LCS) Button†
d) Live Call Screening (LCS) Cancel Button†
e) Voice Mail (VM) Transfer Button†
f) Day Button (Operator and Manager only)
g) Night Button (Operator and Manager only)
h) Lunch Button (Operator and Manager only)
i) Station Lock Button (Operator and Manager only)
• PF buttons can be changed to One-Touch Dialing/One-Touch Access buttons by Station
Programming.
• When the STORE button is pressed after programming, you will hear beep tones as
follows.
— One beep: The entry is different from the one that was stored previously.
— Two beeps: The entry is the same as the previously stored one.
• You can check the stored data by pressing the desired button while on-hook. The data
will be displayed.
Programming References
• Station Programming (Section 2)
Flexible Button Assignment — Direct Station Selection (DSS) Button,
Live Call Screening (LCS) Button†
Live Call Screening (LCS) Cancel Button†
One-Touch Dialing Button
Voice Mail (VM) Transfer Button†
† Available when the KX-TA624 is connected to a Proprietary Telephone capable Panasonic Voice Processing System (one
that supports APT Integration; KX-TVS50).