Filter
Top Products
Station Programming (Personal Programming) 2-19
2.2 Station Programming (Personal Programming)
Intercom Alert Assignment
Allows you to select the alert mode (tone/voice) when receiving an intercom (extension)
call.
— Be sure that you are in the Station Programming mode. Set the MEMORY switch to
“PROGRAM”.
PT
Dial 4.
4
Press STORE.
AUTO DIAL
STORE
1
2
or
Dial 1 or 2.
1 : to select the Ring-Calling (Tone Call) mode
2 : to select the Voice-Calling mode
• The STORE indicator lights.
• The display shows the initial programming mode.
— To exit the Station Programming mode, set the MEMORY switch to “SET”.
Condition
• The default is “Ring-Calling (Tone Call)”.
• The display shows the current status.
<PT Display Example>
• When Ring-Calling (Tone Call) mode is selected;
• When Voice-Calling mode is selected;
Voice Call
Tone Call