Panasonic KX-TA624 Air Conditioner User Manual


 
3-116 Telephone Features
V 3.2 Telephone Features
Conditions
Voice Mail can be assigned as the destination for the following features.
a) Call Forwarding — All Calls
b) Call Forwarding — Busy/No Answer
c) Intercept Routing
Outside callers can leave messages in your mailbox. When an incoming outside call is
received, the operator answers the call and transfers it to your extension.
— If you set the “Call Forwarding” feature at the Voice Mail destination;
The call will be forwarded to Voice Mail automatically.
— If you do not set the “Call Forwarding” feature;
The call will return to the operator. Then the operator will transfer the call to Voice
Mail.
An incoming call via DISA is automatically transferred to Voice Mail when the
destination extension is assigned to “Intercept” and a Voice Mail extension is assigned
as the Intercept Routing destination.
You can also transfer the received outside calls to specific mailboxes so that callers can
leave messages.
A flexible button can be assigned as the FWD/DND button.
If you set the Call Forwarding — Busy/No Answer feature, the FWD/DND button light
will keep flashing. To stop this flashing, go off-hook and dial 716#.
You will hear dial tone 3 if there are messages in your mailbox when you go off-hook.
When you access voice mail, you have to listen to all of the new messages. If you do
not listen to all of the messages, dial tone 3 will be eliminated and you will not know
there are messages left in your mailbox the next time you go off-hook.
Programming References
Station Programming (Section 2)
Flexible Button Assignment — FWD/DND Button,
Return to Message Waiting (MESSAGE) Button
Feature References
Call Forwarding — All Calls, Busy/No Answer
Intercept Routing ( See the Installation Manual.)
SLT
PT
PT
By manual dialing
Any Telephone
Enter the Voice Mail extension number.
Voice Mail extension no.
Lift the handset or press SP-PHONE/MONITOR.
You can listen to the stored message by
following the Voice Mail prompts.
When you use an SLT, you will hear
dial tone 3 if there are messages.