Filter
Top Products
3-102 Telephone Features
R 3.2 Telephone Features
Conditions
• Up to sixty-four digits can be stored and redialed. This does not include an outside
(CO) line access code.
• If you hear a busy tone when attempting to redial, select another line and press the
REDIAL button or feature number.
• The stored number will be replaced even if only one digit is dialed the next time an
outside call is made. Dialing an outside (CO) line access code will not affect the stored
number.
• “ ”, “#”, “PAUSE”, and “INTERCOM” (for secret dialing) are counted as one digit.
• While calling or during a conversation, pressing the REDIAL button will disconnect
the current call and redial the stored number in 3 seconds.
• You can check the stored number. Press the REDIAL button while on-hook, and the
stored number will be displayed.
PT
PT
PT
Redial, Last Number
Automatically saves the last outside phone number dialed so that you can make a call to
the same party later using a simple operation.
PT SLT
Lift the handset. Dial ## or 80.
8 0
or
Press REDIAL.
REDIAL
Lift the handset or press
SP-PHONE/MONITOR.
# #