Filter
Top Products
FX-301-F
Digital Fiber Sensor for Leak Detection /
Liquid Detection Fibers Only
Easy operation even for
beginners!
Optimum settings can
be realized with simple
operations
518
For use with leak detection or liquid detection fiber only
Easy to operate with individual / collective teaching mode
Easy maintenance, as main and sub units are identical
FX-301-F is designed specifically for use
with the leak detection fiber (FD-F7 series)
or the liquid detection fiber (FT-F9 series).
You can easily set the optimum conditions.
After you select the FD-F7 series or the
FT-F9 series with the jog switch, the
optimum threshold level is automatically
set by just pressing the jog switch.
You can set the optimum sensitivity for
all cascaded units in one step by the
optical communications function.
Moreover, since the settings are also
copied to all units, the time involved is
considerably reduced.
Both main and sub units utilize the
same amplifier body. This feature
allows for easy mounting in the side-
by-side configuration. The main and
sub unit functions are distinguished
only by the proper use of 3-core main
cable and the 1-core sub cable.
Moreover, by utilizing the same body
for both main and sub units, inventory
management and maintenance is
simplified.
Flashing function incorporated
Long life and stable operational settings
assure dependable performance
When the leak detection fiber is
connected (F7 mode), if a leak is
detected, you will recognize which fiber
detects the leak at a single glance
because the emitter will start flashing.
FX-301(P)-F incorporates our newly
developed ‘four-chemical emitting
element’, which eliminates such LED
performance deterioration. This new
element results in stable incident light
levels that can be maintained almost
indefinitely.
Individual teaching mode (TEACH)
Collective teaching mode (ALL)
* Passed the UL 991 Environment Test
* UL 61010C-1 compatible, Passed the UL 991 Environment Test based on SEMI S2-0200.
[Category applicable for semiconductor manufacturing:TWW2, Process Equipment]
[Applicable standards:UL 61010C-1]
[Additional test / evaluation standards as per intended use: UL991, SEMI S2-0200]
08/2005