Filter
Top Products
84
FX-301
R25 mm R0.984 in or more [Sleeve of a head with sleeve:R10 mm R0.394 in or more (Note 1)]
מ40 to ם70 °C מ40 to ם158 °F
FT-SFM2SV2: מ20 to
ם
70 °C מ4 to ם158 °F
FT-V22, FD-SFM2SV2:
מ20 to ם60 °C מ4 to ם140 °F
FT-V41, FD-V41, FT-V10:
מ40 to ם60 °C מ40 to ם140 °F
35 to 85%RH (No dew condensation or icing allowed)
Acrylic
Polyethylene (FT-V22: Polyolefin)
Brass (Nickel plated)
FT-SFM2L/T80/SFM2/SNFM2/SFM2SV2/V22/V41,
FD-T80/T40/S80/SNFM2/SFM2SV2/V41 and Sleeve: Stainless steel (SUS)
FT-FM10L: ABS, Lens of FT-FM10L/SFM2L/V10: Acrylic
FT-V10: Stainless steel (SUS) and Polycarbonate
All fibers (except for FT-NB8/N8 and FD-N8/N4): 1 fiber attachment set
Free-cut type fibers (except for FT-NB8/N8 and FD-N8/N4): FX-CT2 (fiber cutter) 1 pc.
Threaded head fibers: Nuts 2 pcs. (thru-beam type: 4 pcs.) and toothed lock washer
1 pc. (thru-beam type:2 pcs.)
R4 mm R0.157 in or more
1 million times or more (at R10 mm R0.394 in, FT-P40/P2 and FD-P40/P2: at R4 mm R0.157 in)
מ40 to ם70 °C מ40 to ם158 °F
FT-Z8Ⅺ, FT-P60, FT-PS1, FD-P60, FD-P50:
מ40 to ם60 °C מ40 to ם140 °F
Vinyl chloride (FT-PS1: Polyethylene, FD-P2:Vinyl chloride and Polyurethane)
Stainless steel (SUS)
FT/FD-P80, FT-P60: Brass (Nickel plated)
Case of FT-Z8Ⅺ: Polycarbonate
Lens of FT-Z8H/Z8E, Front film of FT-Z8: Polyester
All fibers: 1 fiber attachment set.(except for FT-P80 and FD-P80)
Free-cut type fibers: FX-CT2 (fiber cutter) 1 pc.
(FT/FD-P80: FX-CT1 1 pc.)
Threaded head fibers: Nuts 2 pcs. (thru-beam type: 4 pcs.) and toothed lock
washer 1 pc.(thru-beam type: 2 pcs.), FT-Z8Ⅺ: 1 set of mounting screw
R25 mm R0.984 in or more
35 to 85 %RH (No dew condensation or icing allowed)
Acrylic
Polyethylene
Polyolefin (FD-G4/G6: Polyethylene)
Stainless steel (SUS), Polycarbonate
Lens: Norbornene resin
Lens of FT-KV1: Polycarbonate, Prism of FT-KV8: Acrylic
Brass (Nickel plated)
Polycarbonate
Lens of FT-A30, FD-A15: Norbornene resin
Lens of FT-A8: Polyolefin
Allowable bending radius
Bending durability
Ambient temperature
Ambient humidity
Fiber core
Sheath
Fiber head
Accessories (Note 2)
Material
SPECIFICATIONS
Fibers
Item
Type
Standard Flexible
()
()
Notes: 1) Sleeve part of side-view fiber cannot be bent.
Notes: 2) The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-301/311 series. Refer to
p.82 for details ‘FIBER OPTIONS’. Fiber attachment accessories are also supplied along with conventional amplifiers. Please contact our office for more
details on these accessories.
R1 mm R0.039 in or more (FD-WG4/WSG4: R2 mm R0.079 in or more, Sleeve of FD-W44: R10 mm R0.394 in or more)
מ40 to ם60 °C מ40 to ם140 °F (FT-WA30/WA8/WKV8:מ40 to ם55 °C מ40 to ם131 °F)
35 to 85 %RH (No dew condensation or icing allowed)
Acrylic
Polyethylene
Stainless steel (SUS) (including sleeve)
FT-W8/W4, FD-W8/W44/WG4: Brass (Nickel plated)
Case of FT-WA30/WA8/WZ8Ⅺ, Lens of FT-WS8L and Resin part of FT-WKV8: Polycarbonate, Lens of FT-WA30: Norbornene resin
Lens of FT-WA8: Polyolefin, Lens of FT-WZ8H/WZ8E, Reflector of FT-WZ8E and Prism of FT-WKV8: Acrylic,
Reflector of FT-WZ8: Polycarbonate, FD-WL41: Heat-resistant ABS, Front film of FD-WL41: Polyester,
FD-WL42: Aluminum (Black ALMITE), Lens of FD-WKZ1: Optical lens
All fibers: 1 fiber attachment set and FX-CT2 (fiber cutter) 1 pc.
Threaded fibers: Nuts 2 pcs. (thru-beam type: 4 pcs.) and toothed lock washer 1 pc.(thru-beam type: 2 pcs.)
FT-WA30: 0.5
ן32 mm 0.020ן1.260 in seal type slit mask 2 pcs.
FT-WA8: 0.5
ן12 mm 0.020ן0.472 in seal type slit mask 2 pcs.and 1ן12 mm 0.039ן0.472 in seal type slit mask 2 pcs.
FT-WZ8Ⅺ: 1 set of mounting screw
FD-WKZ1: mounting bracket 1 pc.
Allowable bending radius
Ambient temperature
Ambient humidity
Fiber core
Sheath
Fiber head
Accessories (Note)
Material
( )
Note:
The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-301/311 series. Refer to p.82 for details ‘FIBER
OPTIONS’. Fiber attachment accessories are also supplied along with conventional amplifiers.Please contact our office for more details on these accessories.
Allowable bending radius
Ambient temperature
Ambient humidity
Fiber core
Sheath
Fiber head
Accessories (Note)
Material
Note:
The five types of attached fiber attachments (FX-AT2/AT3/AT4/AT5/AT6) described in this catalog are for use only with the FX-301/311 series. Refer to p.82 for details ‘FIBER
OPTIONS’. Fiber attachment accessories are also supplied along with conventional amplifiers.Please contact our office for more details on these accessories.
Type Special use
Item Wide beam Array Narrow beam High precision
FT-A30/A8: R10 mm R0.394 in or more
FD-A15: R25 mm R0.984 in or more
FD-EG2/EG3: R10 mm R0.394 in or more
FD-G4/G6/EG1: R25 mm R0.984 in or
more
R25 mm R0.984 in or more
(FT-KV1: R10 mm R0.394 in or more)
FT-A30, FD-A15: מ40 to ם60 °C מ40 to ם140 °F
FT-A8: מ40 to ם70 °C מ40 to
ם
158 °F
מ40 to ם70 °C
מ40 to ם158 °F
מ40 to ם60 °C
מ40 to ם140 °F
מ20 to ם60°C מ4 to ם140 °F
FD-G4: מ40 to ם70 °C מ40 to ם158 °F
FD-G6:
מ40 to ם60 °C מ40 to ם140 °F
Brass (Nickel plated)
[FD-G6: Stainless steel (SUS)]
All fibers: 1 fiber attachment set and
FX-CT2 (fiber cutter) 1 pc.
FT-A30:0.5ן32 mm 0.020ן1.260 in
seal type slit mask 2 pcs.
FT-A8:0.5ן12 mm 0.020ן0.472 in
seal type slit mask 2 pcs. and
1ן12 mm 0.039ן0.472 in
seal type slit mask 2 pcs.
()
(
() )
All fibers: 1 fiber attachment set
Free-cut type fibers: FX-CT2 (fiber cutter) 1 pc.
Threaded head fibers: Nuts 2 pcs. and toothed lock washer 1 pc.
Item
Type
Sharp bending
08/2005