Filter
Top Products
88 Ceiling & Floor, Ceiling Suspended (50Hz, R22)
16. Function of Remote Controller
Signal transmitter
Transmits the signals
to the room air conditioner.
ON OFF
SET
CANCEL
1
2
7
8
9
10
11
4
5
6
3
1 OPERATION DISPLAY
Displays the operation conditions.
2 START/STOP BUTTON
Operation starts when this button is pressed and stops
when the button is pressed again.
3 OPERATION MODE SELECTION BUTTON
Used to select the operation mode.
4 ON/OFF TIMER BUTTONS
Used to set the time of starting and stopping operation.
5 TIME SETTING BUTTONS
Used to adjust the time.
6 TIMER SET/CANCEL BUTTONS
Used to set the timer when the desired time is obtained
and to cancel the Timer operation.
7 AIR FLOW DIRECTION START/STOP BUTTON
Used to stop or start louver movement and set the
desired up/down airflow direction.
8 SLEEP MODE AUTO BUTTON
Used to set Sleep Mode Auto operation.
9 AIR CIRCULATION BUTTON
Used to circulate the room air without cooling or heating
(turns indoor fan on/off).
10 ROOM TEMPERATURE CHECKING BUTTON
Used to check the room temperature.
11 RESET BUTTON
Used prior to resetting time or after replacing batter-
ies.
Heat Pump Model (18k, 24k, 28k)