LevelOne WBR-3460 Door User Manual


 
Introduction
9
Rear Panel
Figure 3: Rear Panel
ADSL port
Connect this port to your ADSL line.
10/100BaseT
LAN connec-
tions
Use standard LAN cables (RJ45 connectors) to connect your
PCs to these ports.
Note:
Any LAN port on the Wireless ADSL2/2+ Modem Router will
automatically function as an "Uplink" port when required. Just
connect any port to a normal port on the other hub, using a
standard LAN cable.
Reset Button
(Reset to De-
faults)
This button will reset the Wireless ADSL2/2+ Modem Router to
the factory default settings.
To do this, press and hold the Reset Button for five (5) sec-
onds, until the Status LED is lit, then release the Reset Button,
and wait the Wireless ADSL2/2+ Modem Router to restart
using the factory default values.
Power port
Connect the supplied power adapter here.