LevelOne WBR-3460 Door User Manual


 
Setup
17
Figure 7: Setup Wizard - Internet Access
4. On the Internet Access Screen, shown above, select the correct connection type,
as used by your ISP. Click "Next" and complete the configuration for your connec-
tion method.
You need the data supplied by your ISP. Your ISP's data will also have the
DSL Multiplexing Method ( LLC or VC )
The common connection types are explained in the following table..
Connection Type Details ISP Data required
Dynamic
IP Address
Your IP Address is allocated
automatically, when you
connect to you ISP.
Often, none.
Some ISP's may require you to
use a particular Hostname or
Domain name, or MAC (physi-
cal) address.
Static (Fixed)
IP Address
Your ISP allocates a perma-
nent IP Address to you.
Usually, the connection is
"Always on".
IP Address allocated to you,
and related information, such
as Network Mask, Gateway IP
address, and DNS address.
PPPoE, PPPoA You connect to the ISP only
when required. The IP ad-
dress is usually allocated
automatically.
a) User name and password
are always required.
b) If using a Static (Fixed) IP
address, you need the IP
address and related informa-
tion (Network Mask, Gateway
IP address, and DNS address)
IPoA
(IP over ATM)
Normally, the connection is
"Always on".
IP Address allocated to you,
and related information, such
as Network Mask, Gateway IP
address, and DNS address.
5. Step through the Wizard until finished.