LevelOne WBR-3460 Door User Manual


 
Wireless ADSL2/2+ Modem Router User Guide
14
Configuration Program
The Wireless ADSL2/2+ Modem Router contains an HTTP server. This enables you to
connect to it, and configure it, using your Web Browser. Your Browser must support
JavaScript.
The configuration program has been tested on the following browsers:
Netscape 7.1 or later.
Mozilla 1.6 or later
Internet Explorer V5.5 or later
Preparation
Before attempting to configure the Wireless ADSL2/2+ Modem Router, please ensure
that:
Your PC can establish a physical connection to the Wireless ADSL2/2+ Modem
Router. The PC and the Wireless ADSL2/2+ Modem Router must be directly con-
nected (using the Hub ports on the Wireless ADSL2/2+ Modem Router) or on the
same LAN segment.
The Wireless ADSL2/2+ Modem Router must be installed and powered ON.
If the Wireless ADSL2/2+ Modem Router's default IP Address (192.168.0.1) is
already used by another device, the other device must be turned OFF until the
Wireless ADSL2/2+ Modem Router is allocated a new IP Address during configu-
ration.
Using your Web Browser
To establish a connection from your PC to the Wireless ADSL2/2+ Modem Router:
1. After installing the Wireless ADSL2/2+ Modem Router in your LAN, start your PC.
If your PC is already running, restart it.
2. Start your WEB browser.
3. In the Address box, enter "HTTP://" and the IP Address of the Wireless ADSL2/2+
Modem Router, as in this example, which uses the Wireless ADSL2/2+ Modem
Router's default IP Address:
HTTP://192.168.0.1
4. When prompted for the User name and Password, enter values as follows:
User name admin
Password password