Filter
Top Products
Wireless ADSL2/2+ Modem Router User Guide
8
Physical Details
Front-mounted LEDs
Figure 2: Front Panel
Power LED
(Green)
On - Power on.
Off - No power.
Status LED
(Yellow)
Off - Normal operation.
Blinking - This LED blinks during start up, and during a Firmware
Upgrade.
LAN
For each port, there are 2 LEDs, to indicate the connection speed
(10BaseT or 100BaseT) of each port.
• 100BT - This will be ON if the LAN connection is using
100BaseT, and Blinking if data is being transferred via the cor-
responding LAN port.
• 10BT - This will be ON if the LAN connection is using 10BaseT,
and Blinking if data is being transferred via the corresponding
LAN port.
• If neither LED is on, there is no active connection on the corre-
sponding LAN port.
ADSL On - ADSL connection established.
Off - No ADSL connection currently exists.
Flashing – ADSL is synchronizing.
WLAN On - Wireless enabled.
Off - No Wireless connections currently exist.
Flashing - Data is being transmitted or received via the Wireless
access point. This includes "network traffic" as well as user data.
Internet On - Internet connection is available.
Off - No Internet connection available.
Flashing - Data is being transmitted or received via the ADSL
connection.