LevelOne WBR-3460 Door User Manual


 
Chapter 4
PC Configuration
This Chapter details the PC Configuration required on the local ("Inter-
nal") LAN.
Overview
For each PC, the following may need to be configured:
TCP/IP network settings
Internet Access configuration
Wireless configuration
Windows Clients
This section describes how to configure Windows clients for Internet access via the
Wireless ADSL2/2+ Modem Router.
The first step is to check the PC's TCP/IP settings.
The Wireless ADSL2/2+ Modem Router uses the TCP/IP network protocol for all
functions, so it is essential that the TCP/IP protocol be installed and configured on
each PC.
TCP/IP Settings - Overview
If using the default Wireless ADSL2/2+ Modem Router settings, and the
default Windows TCP/IP settings, no changes need to be made.
By default, the Wireless ADSL2/2+ Modem Router will act as a DHCP Server,
automatically providing a suitable IP Address (and related information) to each PC
when the PC boots.
For all non-Server versions of Windows, the default TCP/IP setting is to act as a
DHCP client.
If using a Fixed (specified) IP address, the following changes are re-
quired:
The Gateway must be set to the IP address of the Wireless ADSL2/2+ Modem
Router
The DNS should be set to the address provided by your ISP.
If your LAN has a Router, the LAN Administrator must re-
configure the Router itself. Refer to Chapter 8 - Ad-
vanced Setup for details.
4