LevelOne WBR-3460 Door User Manual


 
Setup
19
Setup Wizard VC Screen
VC
The VC number is displayed (VC2, VC3, or VC4)
Enable
To use this VC, you must enable it by checking this checkbox.
VPI
Enter the VPI value provided by your ISP.
VCI
Enter the VPI value provided by your ISP.
Multiplexing
Select the multiplexing value provided by your ISP.
ATM Service
Select the multiplexing value provided by your ISP.
IP Address
Enter the IP address of the device on your LAN which will re-
ceive the data on this VC.
For Video-on-Demand, this would be the IP address of your
SetTop Box.
For VoIP, this would be the IP address of your VoIP TA.
Note that this IP address does not have to be in the same IP
address range as other devices on your local LAN.
4. When finished, click "Next" and complete the Wizard.
5. After completing the Wizard, you can check the Status screen to see the VC has
been corrected established.