Filter
Top Products
Setup
23
Wireless Screen
The Wireless ADSL2/2+ Modem Router's settings must match the other Wireless
stations.
Note that the Wireless ADSL2/2+ Modem Router will automatically accept both
802.11b and 802.11g connections, and no configuration is required for this feature.
To change the Wireless ADSL2/2+ Modem Router's default settings for the Wireless
Access Point feature, use the Wireless link on the main menu to reach the Wireless
screen. An example screen is shown below.
Figure 11: Wireless Screen
Data - Wireless Screen
Identification
Region
Select the correct domain for your location. It is your responsibil-
ity to ensure:
• That the Wireless ADSL2/2+ Modem Router is only used in
domains for which is licensed.
• That you select the correct domain, so that only the legal
channels for that domain can be selected.
Station name
This is the same as the "Device Name" for the Wireless
ADSL2/2+ Modem Router.