LevelOne WBR-3460 Door User Manual


 
Wireless ADSL2/2+ Modem Router User Guide
106
Figure 70: Routing Screen
Data - Routing Screen
RIP
RIP Direction
Select the desired RIP Direction.
RIP Version
Choose the RIP Version for the Server.
Static Routing
Static Routing
Table Entries
This list shows all entries in the Routing Table.
This area shows details of the selected item in the list.
Change any the properties as required, then click the
"Edit" button to save the changes to the selected entry.
Buttons
Add
Add a new entry to the Static Routing table, using the data
shown in the "Properties" area on screen. The entry selected
in the list is ignored, and has no effect.
Edit
Update the current Static Routing Table entry, using the data
shown in the table area on screen.
Delete
Delete the current Static Routing Table entry.
Save
Save the RIP setting. This has no effect on the Static Routing
Table.
Configuring Other Routers on your LAN
It is essential that all IP packets for devices not on the local LAN be passed to the
Wireless ADSL2/2+ Modem Router, so that they can be forwarded to the external LAN,
WAN, or Internet. To achieve this, the local LAN must be configured to use the Wire-
less ADSL2/2+ Modem Router as the Default Route or Default Gateway.