LevelOne WBR-3460 Door User Manual


 
Operation and Status
55
Connection Status - PPPoE & PPPoA
If using PPPoE (PPP over Ethernet) or PPPoA (PPP over ATM), a screen like the
following example will be displayed when the "Connection Details" button is clicked.
Figure 42: PPPoE Status Screen
Data - PPPoE/PPPoA Screen
Connection Time
This indicates how long the current connection has been
established.
Connection to
Server
This indicates whether or not the connection is currently
established.
If the connection does not exist, the "Connect" button
can be used to establish a connection.
If the connection currently exists, the "Disconnect"
button can be used to break the connection.
Normally, it is not necessary to use the Connect and
Disconnect buttons unless the setting "Connect auto-
matically, as required" is disabled.
Negotiation
This indicates the status of the PPPoE Server login.
Authentication
This will show the Authentication status of the connection.
IP Address
The IP Address of this device, as seen by Internet users.
This address is allocated by your ISP (Internet Service
Provider).
Network Mask
The Network Mask associated with the IP Address above.
Buttons
Connect
If not connected, establish a connection to your ISP.
Disconnect
If connected to your ISP, hang up the connection.
Close
Close this window.