Filter
Top Products
Diagnostics and Troubleshooting
September 2000 5-9
132 knife at both limits Both the front and back knife limit
switches are actuated.
Call for service.
133 timeout sheet xport
reply
The 300 board does not reply to the
200 board within the expected
amount of time.
Call for service.
134 duart self test failed Duart test failed when the printer
was turned on.
Call for service.
192
–
219
Various software error
messages.
A software problem has occurred. Shut down and restart the printer.
Call for service.
Error
Code
Error Message Possible Cause Possible Solution