Filter
Top Products
System Operating Procedures
September 2000 3-9
IMPORTANT:Make sure that the right and left edges of the paper on the paper
roll remain aligned. Do not allow the roll of paper to slide or
“telescope.”
12. Feed the lead edge of the paper through the slotted opening in the paper
cassette.
13. Close the supply cassette and latch the supply cassette locks.
NOTE: Be sure that the core support assembly rotates freely in the supply
cassette and that the paper feeds freely.
screw lock
slotted opening
lead edge of the paper
core support assembly
image or emulsion
(side without the gear)
side