Filter
Top Products
System Operating Procedures
3-20 September 2000
Producing Borderless Prints
To achieve borderless prints on both the front and back edges of the paper, you
must set the Page Starts value to adjust the location of the image so that both
edges of the image print off the paper.
NOTE: The image width should be at least 76 pixels wider than the width of the
paper to ensure a borderless print.
If white borders are present on either the front or back edge of the print:
1. Measure the white border at both the lead (distance A) and the trail edge
(distance B) and determine its average width.
2. Convert the average width of the white border to a pixel value. To do this,
multiply the width by 250 and add 76.
Paper Size Image Width in Pixels
10 inch 2576
11 inch 2826
12 inch 3076
20 inch 5076
A4 3000
outline of the paper
outline of the image
back edge
page start
front edge