Filter
Top Products
Additional Calibration Information
September 2000 C-17
Sending Targets
The Send Target feature enables you to send any properly formatted target file to
the printer without performing a calibration. The target file must contain image
data in the format for the Kodak Professional LED II Printer 20P/20R. The format
of this file must be raw RGB pixel interleaved.
To send a test target to the printer:
1. From the KODAK Device Calibration screen, double-click the device for which
you want to send a test target.
The LED Calibration Application screen appears.
2. Click the Send Test Target icon.
Send Test
Target icon