Filter
Top Products
Additional Calibration Information
September 2000 C-7
The Create a New Device dialog box appears.
2. Enter the correct device settings. Use a unique identifying word for the device
name.
NOTES: The default SCSI ID for the printer is 5. The printer’s OCP menu
displays the current SCSI ID for the printer.
Make sure the Device Type field matches the type of printer that
is being calibrated (for example, Digital LED II 20P).
1. Click OK to accept the changes.
A new printer device icon appears on the KODAK Device Calibration screen.
NOTE: If an error message appears, refer to “Calibration Troubleshooting” on
page 5-19.