Filter
Top Products
20
Chapter 3
Creating a New Analysis Plan
E From the menus choose:
Analyze > Complex
Samples > Prepare for Analysi s...
E
Select Createaplanfile,andchooseaplanfilename to which you will save the analysis plan.
E Click Next to continue t
hrough the Wizard.
E Specify the variable containing sample weights in the Design Variables step, optionally defining
strata and clusters.
E You can now click Finish to save the plan.
Optionally, in further steps you can:
Select the method for estimating standard errors in the Estimation Method step.
Specify the number of units sampled or the inclusion probability per unit in the Size step.
Add a second or third stage to the design.
Paste your selections as command syntax.
Analysis Preparation Wizard: Design Variables
Figure 3-2
Analysis Preparation Wizard, Design Variables step