Filter
Top Products
8.5 Dataflex TA
The Dataflex terminal adaptor
Cable 2 x 15 to 15 way (X21 Cable Assembly refer to page )
When connected to or supplied with a Dataflex Terminal Adaptor the DFT0150will
automatically configure itself for this type of operation. Ensure all terminal adaptor
conections are made BEFORE power up, on power up the DFT0150 will send its
configuration string to the terminal adaptor. The following is provided for information
only.
These commands are entered using Setup Mode on the DVST0150 unit.
SEND CONFIGURATION STRING
1 At the command prompt CMD> type
ISDN=ATMODE <RET>
At the command prompt CMD> type
ISDNSTR =DATAFLEX <RET>
Wait for the information to be sent to
the modem.
At the command prompt CMD> type
DUALISDN=ON <RET>
SEND <RET>
ISDN0 <RET>
AT <RET>
AT&W <RET>
<ESC>
ISDN1 <RET>
AT <RET>
AT&W <RET>
<ESC>
At the command prompt CMD> type
QUIT <RET>
The Dataflex TA is now configured for use with the DVST0150.
Page 38 Dedicated Micros Ltd
Terminal Adapters DVST Installation Guide