7.9 Microcom V3242
Cable required to connect to DVST 25to25 (Part No.AS-DVST-SYNC)
Syncronous mode :
&M1Dial async, switch on connect.
&D2Hangs up with on to off transition of DTR - needed for auto answer.
\G0Disables modem flow control.
\E0Do not echo data !
E1Echo commands.
&C1CD follows carrier.
\J0Turn off baud rate adjust.
DIP Switch Settings Synchronous Operation
Dedicated Micros Ltd Page 27
DVST Installation Guide Modems
Front panel switches Rear panel switches