Filter
Top Products
2 Unpacking the unit
2.1 Items in packing
The unit should be carefully unpacked and the packing materials retained. Check that all
the contents on the following checklist are present:
q
DVST Unit
q
Power Lead with molded IEC connector
q
Rack mount conversion kit
q
Installation Guide
2.2 Packing the DVST
If the DVST is to be returned for repair or transported to another location the original
packing should be used.
The unit should first be wrapped in the polythene bag. The preformed end pieces are
then placed at either side of the unit which can then be placed inside the cardboard box.
The box should be firmly sealed using appropriate tape.
If the unit is to be returned for repair ensure a valid returns note is clearly written
on the side of the box.
Dedicated Micros Ltd Page 3
DVST Installation Guide Unpacking the unit