Filter
Top Products
7.10 Trailblazer
Cable required to connect to DVST 9to25 (Part No. AS-DVST-ASYNC)
Async mode
Trailblazer in Conventional Command mode.
&C1CD follows carrier.
&k3RTS/CTS flow control.
E1Echo commands
V1Textual result codes
&M0Async mode
s7=60Wait 60 seconds for carrier.
s10=7Carrier loss to disconnect time.
s37=7Attempt to connect in PEP mode.
~s50=255Operate in PEP mode.
~s51=519200 bps operation.
~s52=1Modem hangs up on DTR, only autoanswer on DTR.
~s110=0PEP data compression disabled.
~s104=0Disable auto dialling.
Page 28 Dedicated Micros Ltd
Modems DVST Installation Guide