MB91401
47
■
■■
■
ELECTRICAL CHARACTERISTICS
1. Absolute Maximum Ratings
*1 : This parameter is based on VSS = PLLVSS = 0 V.
*2 : Note that analog power supply voltage and input voltage do not exceed VDDE + 0.3 V at power on.
*3 : The maximum output current is the peak value for a single pin.
*4 : The average output current is the average current for a single pin over a period of 100 ms.
*5 : The total average output current is the average current for all pins over a period of 100 ms.
WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
Notes : • Apply equal potential to all of the VDDE pins.
• Apply equal potential to all of the VDDI pins.
• Fix all of the VSS pins at 0 V.
• Leave N.C. pins open.
Parameter Symbol
Rating
Unit
Remarks
Min Max
Power supply
voltage*
1
I/O VDDE VSS − 0.3 VSS + 4.0 V
Internal V
DDI VSS − 0.3 VSS + 2.5 V
Analog power supply voltage PLLVDD VSS − 0.3 VSS + 4.0 V *2
Input voltage*
1
VI VSS − 0.3 VDDE + 0.3 V
Output voltage*
1
VO VSS − 0.3 VDDE + 0.3 V
“L” level maximum output current I
OL T.B.D mA *3
“L” level average output current I
OLAV T.B.D mA *4
“L” level total maximum output current ΣI
OL T.B.D mA
“L” level total average output cur rent ΣI
OLAV T.B.D mA *5
“H” level maximum output current I
OH T.B.D mA *3
“H” level average output current I
OHAV T.B.D mA *4
“H” level total maximum output current ΣI
OH T.B.D mA
“H” level total average output cur rent ΣI
OHAV T.B.D mA *5
Power consumption P
D T.B.D mW
Operating temperature Ta − 10 70 °C
Storage temperature Tstg − 55 150 °C
Prelminary
2004.11.12