32
Ledges for top right log.
Figure 51. Log Placement Step 3.
Secondary Installation
3. A bag of ceramic ber
embers and rock wool
embers is provided
gently remove the
ember material from
the plastic bag.
Spread a layer loosely
across the burner
tray. Do not allow any
embers to rest against
pilot assembly. (See
diagram provided
for proper ember
placement.)
4. DO NOT pack this
ember material as this
could create an unsafe
condition, leave
embers loose
5. Upon the rst light
up, watch for ignition
to ALL burner ports.
If a long delay is
noted: First, wait for
the appliance to cool
down.
• Open the front door of
the appliance.
• Check to carefully
reposition the embers
making sure that
burner ports are
not plugged solid or
blocked.
Figure 52. Log Placement Step 4.
Figure 53. Ember Placement.