Filter
Top Products
31
Secondary Installation
INSTALLATION OF LOG SET AND EMBERS:
The placement of the logs is not arbitrary. If they are positioned incorrectly, the ames can be “pinched”
and will not burn correctly. The burner come with four (4) locator pins (see Figure 48), and the bottom
Placement pegs for
bottom right log.
Placement pegs for
bottom left log.
Ledges for top left log.
logs have ledges which
make alignment easier.
Using the pictures
provided, carefully set the
logs in place.
NOTE: The logs are
fragile and should be
handled gently.
CAUTION: Use only
the type of ember
material supplied with
this appliance. Due to
the irregular size of the
ember material there may
be more than required.
The use of other foreign
materials on the burners
may create dangerous
conditions.
If over time, through
cleaning and servicing,
these embers require
replacement, contact the
nearest ENVIRO dealer
for replacement embers.
1. Carefully remove logs
from box. Check to
ensure there is no
damage. It is very
important to install all
logs in their proper
position to insure safe,
optimum operating
conditions.
2. Place the log set into
the rebox. Locate
each log by seating it
down onto the burner
tray support pins.
Follow the gures to
the right for proper log
placement.
Figure 50. Log Placement Step 2.
Figure 49. Log Placement Step 1.
Figure 48. Ascot Burner Tray.