Filter
Top Products
Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software
timeout login response
SR-93
Cisco IOS XR System Security Command Reference
timeout login response
To set the interval that the server waits for a reply to a login, use the timeout login response command
in line configuration mode. To restore the default, use the no form of this command.
timeout login response seconds
no timeout login response seconds
Syntax Description
Defaults seconds: 30 seconds
Command Modes Line configuration
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Use the timeout login response command in line configuration mode to set the timeout value. This
timeout value applies to all terminal lines to which the entered line template is applied. This timeout
value can also be applied to line console. After the timeout value has expired, the user is prompted again.
The retry is allowed three times.
Task ID
Examples The following example shows how to change the interval timer to 20 seconds:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# line template alpha
RP/0/RP0/CPU0:router(config-line)# timeout login response 20
seconds Integer that specifies the timeout interval (in seconds) from 0 to 300.
Release Modification
Release 2.0 This command was introduced on the Cisco CRS-1.
Release 3.0 No modification.
Release 3.2 This command was supported on the Cisco XR 12000 Series Router.
Release 3.3.0 No modification.
Task ID Operations
aaa read, write