Filter
Top Products
Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software
show radius authentication
SR-64
Cisco IOS XR System Security Command Reference
show radius authentication
To obtain information and detailed statistics for the RADIUS authentication server and port, use the
show radius authentication command in EXEC mode.
show radius authentication
Syntax Description This command has no arguments or keywords.
Defaults If no RADIUS servers are configured on the router, the output is empty. If the default values are for the
counter (for example, request and pending), the values are all zero because the RADIUS server was just
defined and not used yet.
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Task ID
Examples The following sample output is for the show radius authentication command:
RP/0/RP0/CPU0:router# show radius authentication
Server: 12.26.25.61, port: 1812
0 requests, 0 pending, 0 retransmits
0 accepts, 0 rejects, 0 challenges
0 timeouts, 0 bad responses, 0 bad authenticators
0 unknown types, 0 dropped, 0 ms latest rtt
Server: 12.26.49.12, port: 1812
0 requests, 0 pending, 0 retransmits
0 accepts, 0 rejects, 0 challenges
0 timeouts, 0 bad responses, 0 bad authenticators
0 unknown types, 0 dropped, 0 ms latest rtt
Release Modification
Release 3.3.0 This command was introduced on the Cisco CRS-1 and
Cisco XR 12000 Series Router.
Task ID Operations
aaa read