Filter
Top Products
Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software
accounting
SR-17
Cisco IOS XR System Security Command Reference
accounting
To enable authentication, authorization, and accounting (AAA) accounting services for a specific line or
group of lines, use the accounting command in line configuration mode. To disable AAA accounting
services, use the no form of this command.
accounting {commands | exec} {default | list-name}
no accounting {commands | exec}
Syntax Description
Defaults Accounting is disabled.
Command Modes Line configuration
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
After you enable the aaa accounting command and define a named accounting method list (or use the
default method list) for a particular type of accounting, you must apply the defined lists to the
appropriate lines for accounting services to take place. Use the accounting command to apply the
specified method lists to the selected line or group of lines. If a method list is not specified this way, no
accounting is applied to the selected line or group of lines.
Task ID
commands Enables accounting on the selected lines for all EXEC shell commands.
exec Enables accounting of an EXEC session.
default The name of the default method list, created with the aaa accounting command.
list-name Specifies the name of a list of accounting methods to use. The list is created with the
aaa accounting command.
Release Modification
Release 2.0 This command was introduced on the Cisco CRS-1.
Release 3.0 No modification.
Release 3.2 This command was supported on the Cisco XR 12000 Series Router.
Release 3.3.0 No modification.
Task ID Operations
aaa read, write