Filter
Top Products
Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software
aaa group server radius
SR-14
Cisco IOS XR System Security Command Reference
Task ID
Examples The following example shows the configuration of an AAA group server named radgroup1, which
comprises three member servers:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# aaa group server radius radgroup1
RP/0/RP0/CPU0:router(config-sg-radius)# server 10.0.0.5 auth-port 1700 acct-port 1701
RP/0/RP0/CPU0:router(config-sg-radius)# server 10.0.0.10 auth-port 1702 acct-port 1703
RP/0/RP0/CPU0:router(config-sg-radius)# server 10.0.0.20 auth-port 1705 acct-port 1706
Note If the auth-port port-number keyword and argument and the acct-port port-number keyword and
argument are not specified, the default value of the port-number argument for the auth-port keyword is
1645 and the default value of the port-number argument for the acct-port keyword is 1646.
Related Commands
Task ID Operations
aaa read, write
Command Description
radius-server host Specifies a RADIUS server host.