Filter
Top Products
Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software
show radius dead-criteria
SR-68
Cisco IOS XR System Security Command Reference
show radius dead-criteria
To obtain information about the dead server detection criteria, use the show radius dead-criteria
command in EXEC mode.
show radius dead-criteria host ip-addr [auth-port auth-port] [acct-port acct-port]
Syntax Description
Defaults The default values for time and tries are not fixed to a single value; therefore, they are calculated and fall
within a range of 10 to 60 seconds for time and 10 to 100 for tries.
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Task ID
Examples The following sample output is for the show radius dead-criteria command:
RP/0/RP0/CPU0:router# show radius dead-criteria host 12.26.49.12 auth-port 11000 acct-port
11001
Server: 12.26.49.12/11000/11001
Dead criteria time: 10 sec (computed) tries: 10 (computed)
host ip-addr Specifies the name or IP address of the configured RADIUS server.
auth-port auth-port (Optional) Specifies the authentication port for the RADIUS server. The
default value is 1645.
acct-port acct-port (Optional) Specifies the accounting port for the RADIUS server. The
default value is 1646.
Release Modification
Release 3.3.0 This command was introduced on the Cisco CRS-1 and
Cisco XR 12000 Series Router.
Task ID Operations
aaa read