Filter
Top Products
Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software
radius-server dead-criteria tries
SR-38
Cisco IOS XR System Security Command Reference
Examples The following example shows how to establish the number of tries for the dead-criteria conditions for a
RADIUS server to be marked as dead for the radius-server dead-criteria tries command:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# radius-server dead-criteria tries 4
Related Commands Command Description
radius-server
dead-criteria time
Defines the length of time in seconds that must elapse from the time that
the router last received a valid packet from the RADIUS server to the
time the server is marked as dead.
radius-server deadtime Defines the length of time, in minutes, for a RADIUS server to remain
marked dead.
show radius
dead-criteria
Displays information for the dead-server detection criteria.