Filter
Top Products
Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software
authorization
SR-19
Cisco IOS XR System Security Command Reference
authorization
To enable authentication, authorization, and accounting (AAA) authorization for a specific line or group
of lines, use the authorization command in line configuration mode. To disable authorization, use the
no form of this command.
authorization {commands | exec} {default | list-name}
no authorization {commands | exec}
Syntax Description
Defaults Authorization is not enabled.
Command Modes Line configuration
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
After you use the aaa authorization command to define a named authorization method list (or use the
default method list) for a particular type of authorization, you must apply the defined lists to the
appropriate lines for authorization to take place. Use the authorization command to apply the specified
method lists (or, if none is specified, the default method list) to the selected line or group of lines.
Task ID
commands Enables authorization on the selected lines for all commands.
exec Enables authorization for an interactive (EXEC) session.
default Applies the default method list, created with the aaa authorization command.
list-name Specifies the name of a list of authorization methods to use. If no list name is
specified, the system uses the default. The list is created with the aaa
authorization command.
Release Modification
Release 2.0 This command was introduced on the Cisco CRS-1.
Release 3.0 No modification.
Release 3.2 This command was supported on the Cisco XR 12000 Series Router.
Release 3.3.0 No modification.
Task ID Operations
aaa read, write