Filter
Top Products
Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software
description (AAA)
SR-23
Cisco IOS XR System Security Command Reference
description (AAA)
To create a description of a task group or user group during configuration, use the description command
in task group configuration or user group configuration mode. To delete a task group description or user
group description, use the no form of this command.
description string
no description
Syntax Description
Defaults The default description is blank.
Command Modes Task group configuration
User group configuration
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Use the description command inside the task or user group configuration submode to define a
description for the task or user group, respectively.
Task ID
string Character string describing the task group or user group.
Release Modification
Release 2.0 This command was introduced on the Cisco CRS-1.
Release 3.0 No modification.
Release 3.2 This command was supported on the Cisco XR 12000 Series Router.
Release 3.3.0 No modification.
Task ID Operations
aaa read, write