Filter
Top Products
Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software
show radius client
SR-66
Cisco IOS XR System Security Command Reference
show radius client
To obtain general information about the RADIUS client on Cisco IOS XR software, use the show radius
client command in EXEC mode.
show radius client
Syntax Description This command has no arguments or keywords.
Defaults The default value for the counters (for example, an invalid address) is 0. The network access server
(NAS) identifier is the hostname that is defined on the router.
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
The show radius client command displays the authentication and accounting responses that are received
from the invalid RADIUS servers, for example, unknown to the NAS. In addition, the show radius client
command displays the hostname or NAS identifier for the RADIUS authentication client, accounting
client, or both.
Task ID
Examples The following sample output is for the show radius client command:
RP/0/RP0/CPU0:router# show radius client
Client NAS identifier: miniq
Authentication responses from invalid addresses: 0
Accounting responses from invalid addresses: 0
Release Modification
Release 3.3.0 This command was introduced on the Cisco CRS-1 and
Cisco XR 12000 Series Router.
Task ID Operations
aaa read