Filter
Top Products
Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software
show user
SR-78
Cisco IOS XR System Security Command Reference
show user
To display all user groups and task IDs associated with the currently logged-in user, use the show user
command in EXEC mode.
show user [all | authentication | group | tasks]
Syntax Description
Defaults No default behavior or values
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Use the show user command to display all user groups and task IDs associated with the currently
logged-in user.
Task ID
all (Optional) Displays all user groups and task IDs for the currently logged-in user.
authentication (Optional) Displays authentication parameters for the currently logged-in user.
group (Optional) Displays the user groups associated with the currently logged-in user.
tasks (Optional) Displays task IDs associated with the currently logged-in user. The tasks
keyword indicates which task is reserved in the sample output.
Release Modification
Release 2.0 This command was introduced on the Cisco CRS-1.
Release 3.0 No modification.
Release 3.2 This command was supported on the Cisco XR 12000 Series Router.
Release 3.3.0 The following enhancements are added:
• An example was added to display all the group and tasks.
• The authentication keyword was added.
• The sample output for the group keyword was updated.
• The sample output to display whether or not a task is reserved for the
tasks keyword was updated.
Task ID Operations
none —