Filter
Top Products
Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software
show tacacs
SR-72
Cisco IOS XR System Security Command Reference
show tacacs
To display information about the TACACS+ servers that are configured in the system, use the show
tacacs command in EXEC mode.
show tacacs
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Use the show tacacs command to display statistics for each configured TACACS+ server.
Task ID
Examples The following is sample output from the show tacacs command:
RP/0/RP0/CPU0:router# show tacacs
Server:1.1.1.1/21212 opens=0 closes=0 aborts=0 errors=0
packets in=0 packets out=0
status=up single-connect=false
Server:2.2.2.2/21232 opens=0 closes=0 aborts=0 errors=0
packets in=0 packets out=0
status=up single-connect=false
Release Modification
Release 2.0 This command was introduced on the Cisco CRS-1.
Release 3.0 No modification.
Release 3.2 This command was supported on the Cisco XR 12000 Series Router.
Release 3.3.0 No modification.
Task ID Operations
aaa read