Filter
Top Products
Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software
aaa default-taskgroup
SR-12
Cisco IOS XR System Security Command Reference
aaa default-taskgroup
To specify a task group to be used for both remote TACACS+ authentication and RADIUS
authentication, use the aaa default-taskgroup command in global configuration mode. To remove this
default task group, enter the no form of this command.
aaa default-taskgroup taskgroup-name
no aaa default-taskgroup
Syntax Description
Defaults No default task group is assigned for remote authentication.
Command Modes Global configuration
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Use the aaa default-taskgroup command to specify an existing task group to be used for remote
TACACS+ authentication.
Task ID
Examples The following example shows how to specify taskgroup1 as the default task group for remote TACACS+
authentication:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# aaa default-taskgroup taskgroup1
taskgroup-name Name of an existing task group.
Release Modification
Release 3.2 This command was introduced on the Cisco CRS-1 and
Cisco XR 12000 Series Router.
Release 3.3.0 No modification.
Task ID Operations
aaa read, write