Filter
Top Products
Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software
radius-server dead-criteria time
SR-36
Cisco IOS XR System Security Command Reference
Examples The following example shows how to establish the time for the dead-criteria conditions for a RADIUS
server to be marked as dead for the radius-server dead-criteria time command:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# radius-server dead-criteria time 5
Related Commands Command Description
radius-server
dead-criteria tries
Specifies the number of consecutive timeouts that must occur on the
router before the RADIUS server is marked as dead.
radius-server deadtime Defines the length of time, in minutes, for a RADIUS server to remain
marked dead.
show radius
dead-criteria
Displays information for the dead-server detection criteria.