Filter
Top Products
Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software
taskgroup
SR-91
Cisco IOS XR System Security Command Reference
taskgroup
To configure a task group to be associated with a set of task IDs, and to enter task group configuration
mode, use the taskgroup command in global configuration mode. To delete a task group, use the no form
of this command.
taskgroup taskgroup-name [description string | task {read | write | execute | debug}
taskid-name | inherit taskgroup taskgroup-name]
no taskgroup taskgroup-name
Syntax Description
Defaults Five predefined user groups are available by default.
Command Modes Global configuration
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Task groups are configured with a set of task IDs for each action type. Deleting a task group that is still
referenced in the system results in a warning and rejection of the deletion.
From global configuration mode, you can display all the configured task groups. However, you cannot
display all the configured task groups in taskgroup configuration mode.
taskgroup-name Name of a particular task group.
description (Optional) Enables you to create a description for the named task group.
string (Optional) Character string used for the task group description.
task (Optional) Specifies that a task ID is to be associated with the named task group.
read (Optional) Specifies that the named task ID permits read access only.
write (Optional) Specifies that the named task ID permits read and write access only.
execute (Optional) Specifies that the named task ID permits execute access.
debug (Optional) Specifies that the named task ID permits debug access only.
taskid-name (Optional) Name of a task: the task ID.
inherit taskgroup (Optional) Copies permissions from the named task group.
taskgroup-name (Optional) Name of the task group from which permissions are to be inherited.
Release Modification
Release 2.0 This command was introduced on the Cisco CRS-1.
Release 3.0 No modification.
Release 3.2 This command was supported on the Cisco XR 12000 Series Router.
Release 3.3.0 Support was added to display all task groups in global configuration mode.