Filter
Top Products
8-5
VPN 3002 Hardware Client Reference
OL-1893-01
Chapter 8 Management Protocols
Configuration | System | Management Protocols | Telnet
Enable Telnet/SSL
Check the box to enable Telnet over SSL. The box is checked by default. Telnet/SSL uses Telnet over a
secure, encrypted connection.
Telnet Port
Enter the port number that the Telnet server uses. The default is 23, which is the well-known port
number.
Telnet/SSL Port
Enter the port number that Telnet over SSL uses. The default is 992, which is the well-known port
number.
Maximum Connections
Enter the maximum number of concurrent, combined Telnet and Telnet/SSL connections that the server
allows. Minimum is 1, default is 5, maximum is 10.
Apply / Cancel
To apply your Telnet settings, and to include the settings in the active configuration, click Apply. The
Manager returns to the Configuration | System | Management Protocols screen.
Reminder:
To save the active configuration and make it the boot configuration, click the Save Needed icon at the
top of the Manager window.
To discard your settings, click Cancel. The Manager returns to the Configuration | System | Management
Protocols screen.
Figure 8-5 Configuration | System | Management Protocols Screen