Filter
Top Products
3-7
VPN 3002 Hardware Client Reference
OL-1893-01
Chapter 3 Interfaces
Configuration | Interfaces | Public
PPPoE User Name
If you have selected PPPoE, enter a valid PPPoE username.
PPPoE Password
If you have selected PPPoE, enter the PPPoE password for the username you entered above.
Verify PPPoE Password
If you have selected PPPoE, enter the PPPoE password again to verify it.
Static IP Addressing
click this radio button if you want to use a static IP address.
IP Address
If you are using static IP addressing, enter the IP address for this interface, using dotted decimal notation
(for example, 192.168.12.34). Note that 0.0.0.0 is not allowed. Be sure no other device is using this
address on the network.
Subnet Mask
If you are using static IP addressing, enter the subnet mask for this interface, using dotted decimal
notation (for example, 255.255.255.0). The Manager automatically supplies a standard subnet mask
appropriate for the IP address you just entered. For example, the IP address 192.168.12.34 is a Class C
address, and the standard subnet mask is 255.255.255.0. You can accept this entry or change it. Note that
0.0.0.0 is not allowed.
MAC Address
This is the unique hardware MAC (Media Access Control) address for this interface, displayed in 6-byte
hexadecimal notation. You cannot change this address.
Speed
If you are using static IP addressing, click the drop-down menu button and select the interface speed:
• 10 Mbps = Fix the speed at 10 megabits per second (10Base-T networks).
• 100 Mbps = Fix the speed at 100 megabits per second (100Base-T networks).
• 10/100 auto = Let the VPN 3002 automatically detect and set the appropriate speed, either 10 or 100
Mbps (default). Be sure that the port on the active network device (hub, switch, router, etc.) to which
you connect this interface is also set to automatically negotiate the speed. Otherwise, select the
appropriate fixed speed.