Filter
Top Products
10-2
VPN 3002 Hardware Client Reference
OL-1893-01
Chapter 10 General
Configuration | System | General | Identification
Configuration | System | General | Identification
This screen lets you configure system identification parameters that are stored in the standard MIB-II
system object. Network management systems using SNMP can retrieve this object and identify the
system. Configuring this information is optional.
Figure 10-2 Configuration | System | General | Identification Screen
System Name
Enter a system name that uniquely identifies this VPN 3002 on your network; for example, VPN01.
Maximum 255 characters.
Contact
Enter the name of the contact person who is responsible for this VPN 3002. Maximum 255 characters.
Location
Enter the location of this VPN 3002. Maximum 255 characters.
Apply / Cancel
To apply your system identification settings and include them in the active configuration, click Apply.
The Manager returns to the Configuration | System | General screen.
Reminder:
To save the active configuration and make it the boot configuration, click the Save Needed icon at the
top of the Manager window.
To discard your settings, click Cancel. The Manager returns to the Configuration | System | General
screen.