Filter
Top Products
8-3
VPN 3002 Hardware Client Reference
OL-1893-01
Chapter 8 Management Protocols
Configuration | System | Management Protocols | HTTP/HTTPS
Enable HTTPS
Check the box to enable the HTTPS server. The box is checked by default. HTTPS, also known as HTTP
over SSL, lets you use the Manager over an encrypted connection.
Enable HTTPS on Public
Check the box to enable HTTPS on the Public interface.
HTTP Port
Enter the port number that the HTTP server uses. The default is 80, which is the well-known port.
HTTPS Port
Enter the port number that the HTTPS server uses. The default is 443, which is the well-known port.
Maximum Sessions
Enter the maximum number of concurrent, combined HTTP and HTTPS sessions (users) that the server
allows. Minimum is 1, default is 4, maximum is 10.
Apply/Cancel
To apply your HTTP/HTTPS server settings, to include your settings in the active configuration, and to
break the current HTTP/HTTPS connection, click Apply. If HTTP or HTTPS is still enabled, the
Manager returns to the main login screen. If both HTTP and HTTPS are disabled, you can no longer use
the Manager, and you will have to gain access through the console other configured connection.
Reminder:
To save the active configuration and make it the boot configuration, click the Save Needed icon at the
top of the Manager window.
To discard your settings, click Cancel. The Manager returns to the Configuration | System | Management
Protocols screen.